Warning signs on Metal-on-metalimplants

Patients with a common type of metal hip implant should have annual health checks for life, according to the UK body for regulating medical devices.

The all-metal devices have been found to wear down at an accelerated rate in some patients, potentially causing damage and deterioration in the bone and tissue around the hip. There are also concerns that they could leak traces of metal into the bloodstream, which the annual medical checks will monitor.

In 2012, the Medicines and Healthcare products Regulatory Agency (MHRA) issued guidelines on larger head forms of "metal-on-metal" hip implants. Advice on smaller head devices or those featuring ceramic heads has not changed.

Check-ups are a precautionary measure to reduce the small risk of complications and the need for further surgery.

The new guidelines were reported in the media and discussed on this site .

What should I do if I have a hip implant?

The guidance only applies to large head metal-on-metal implants, which have been used in only a minority of hip replacement surgeries. However, you can consult your doctor for further advice if you have any concerns about your hip replacement or don't know which type you have.

Patients with hip implants should also be aware of the warning signs that could signal a problem.

What are the warning signs?

Patientswithmetal-on-metal implants should ensure they attend any follow-up appointments as usual.

You should see your doctor if you have:

  • pain in the groin, hip or leg
  • swelling at or near the hip joint
  • a limp or problems walking
  • grinding or clunking from the joint

These symptoms don't necessarily mean your device is failing, but they do need investigating.

Any changes in general health should also be reported, including:

  • chest pain or shortness of breath
  • numbness or weakness
  • changes in vision or hearing
  • fatigue
  • feeling cold
  • weight gain

What types of implants are involved?

There are numerous designs and materials used to make hip implants. In 2012the MHRA issued major updates to its advice on a type of metal-on-metal hip replacement. As the name implies,metal-on-metal implants feature a joint made of two metal surfaces a metal "ball" that replaces the ball found at the top of the thigh bone (femur) and a metal "cup" that acts like the socket found in the pelvis.

The MHRA's updated advice concerned the type ofmetal-on-metal implant in which the head of the femur is 36mm or greater. This is often referred to as a "large head" implant. The agency now says patients fitted with this type of implant should be monitored annually for the life of the implant, and should also have tests to measure levels of metal particles (ions) in their blood.

Patients with these implants who have symptoms should also have MRI or ultrasound scans, and patients without symptoms should have a scan if the level of metal ions in their blood is rising.

The previous guidance on this type of hip implant, issued in April 2010, advised that patients should be monitored annually for no fewer than five years.

Advice on following up patients with other types ofmetal-on-metal implants remains the same, and guidance has not changed on:

  • Metal-on-metal hip resurfacing implants where the socket and ball of the hip bone has a metal surface applied to it rather than being totally replaced.
  • Totalmetal-on-metal implants where the replacement ball is less than 36mm wide.
  • A particular range of hip replacements called DePuy ASR these hip replacements were recalled by their manufacturer, DePuy, in 2010 because of high failure rates. The company made three types of ASR implant.
  • Implants featuring ceramic heads.

How many people are affected?

It is estimated that 49,000 people in the UK have been given metal-on-metal implants with a width of 36mm or above. This represents a minority of the patients given hip replacements, who mostly have devices featuring ceramic or smaller metal heads.

In 2010 there were 76,759 hip replacements, and approximately 5% of these surgeries used an metal-on-metal implant sized 36mm or above.

What exactly is the problem with metal-on-metal implants?

All hip implants wear down over time as the ball and cup slide against each other during walking and running. Although many people live the rest of their lives without needinga replacementimplant, any implant may eventually need surgery to remove or replace its components.

However, data now suggests that large headmetal-on-metal hip implants (those with a width of 36mm or greater) wear down at a faster rate than other types of implants. As friction acts upon their surfaces, it can cause tiny metal particles (medically referred to as "debris") to break off and enter the space around the implant.

Individuals are thought to react differently to the presence of these metal particles, but in some people they can trigger inflammation and discomfort in the area around the implant.

Over time this can cause damage and deterioration in the bone and tissue surrounding the implant and joint. This, in turn, may cause the implant to become loose and cause painful symptoms, meaning that further surgery is required.

News coverage ( such as this BBC story ) focused on the MHRA's recommendation to check for the presence of metal ions in the bloodstream, potentially released either from debris or the implant itself. Ions are electrically charged molecules. Levels of ions in the bloodstream, particularly of the cobalt and chromium used in the surface of the implants, may therefore indicate how much wear there is to the artificial hip.

There has been no definitive link between ions frommetal-on-metal implants and illness, although there has been a small number of cases in which high levels of metal ions in the bloodstream have been associated with symptoms or illnesses elsewhere in the body, including effects on the heart, nervous system and thyroid gland.

The MHRA points out that most patients withmetal-on-metal implants have well functioning hips and are thought to be at low risk of developing serious problems. However, a small number of patients with these hip implants develop soft tissue reactions to the 'wear debris' associated with somemetal-on-metal implants.

How are medical devices regulated?

In the UK, the MHRA is the government agency responsible for ensuring that medical devices work and are safe. The MHRA audits the performance of private sector organisations (called notified bodies) that assess and approve medical devices.

Once a product is on the market and in use, the MHRA has a system for receiving reports of problems with these products, and will issue warnings if these problems are confirmed through its investigations. It also inspects companies that manufacture products to ensure they comply with regulations.

This system differs greatly from that for testing and approving drugs. Drugs require several years of research testing and trials before they can be approved for clinical use.

What action have regulators taken?

The MHRA has convened an expert advisory group to look at the problems associated withmetal-on-metal implants, meeting regularly to assess new scientific evidence and reports from doctors and medical staff treating patients. The agency says it's continuing to closely monitor all the latest evidence about these devices and may issue further advice in the future.

In the US, the Food and Drug Administration (FDA) says it's gathering additional information about adverse events in patients withmetal-on-metal implants. In the meantime, it advises patients withmetal-on-metal hip implants who have no symptoms to attend follow-up appointments as normal with their surgeon. Patients who develop symptoms should see their surgeon promptly for further evaluation.

What actions have critics called for?

In light of the PIP implants and the information on hip implants, there is currently intense scrutiny on the way medical devices are regulated in the UK and Europe, with patient groups and the media arguing that medical devices should be regulated in a similar way to medicines.

Clearing a medicine for use in the UK is a lengthy process involving several stages of laboratory and animal testing, and then carefully controlled and monitored tests in humans. Only once there's enough evidence to suggest that a medicine is reasonably safe can it enter clinical use, and even then patients will be monitored to look at the longer-term effects of the drug.

However, medical devices aren't required to go through human trials before entering use, and can currently be approved on the basis of mechanical tests and animal research.

While certain devices, such as hip implants, have been monitored through systems such as the National Joint Registry , in light of health concerns over PIP breast implants, patient groups are calling for more testing before devices are allowed into clinical use, and closer, mandatory monitoring schemes to ensure their safety once they enter the market.

Further reading

D Cohen How safe are metal-on-metal hip implants? BMJ2012

Content supplied by the NHS Website

Medically Reviewed by a doctor on 11 Oct 2016